HTP Series Super Rigid Bridge Type Machining Center :
| Print this page | HTP-4025 | HTP-5025 | HTP-6025 |
|---|---|---|---|
| SPECIFICATIONS | |||
| X-axis travel | 4,000 mm | 5,000 mm | 6,000 mm |
| Y-axis travel | 2,500 mm ( Opt. 3,200 ) | ||
| Z-axis travel | 1,000 mm ( Opt. 1,200 / 1,400 ) | ||
| Dist. between columns | 2,700 mm | ||
| Dist. from spindle nose to table top | 200 ~ 1,200 mm ( Opt. 200 ~ 1,400 / 200 ~ 1,600 ) | ||
| TABLE | |||
| Table size ( X x Y ) | 4,020 x 2,400 mm | 5,020 x 2,400 mm | 6,020 x 2,400 mm |
| Table load capacity | 15,000 kg | 18,000 kg | 20,000 kg |
| SPINDLE | |||
| Spindle taper | BBT50 ( ISO 50 ) | ||
| Spindle motor ( Cont. / 30 min. ) | 22 / 26 kW ( Opt. 30 / 37 ) | ||
| Spindle speed | Gear Spindle 4,000 rpm | ||
| FEED RATE | |||
| X-axis rapids feed rate | 15 m/min. | 10 m/min. | |
| Y / Z axes rapids feed rate | 12 m/min. | ||
| Cutting feed rate | 1 ~ 10 m/min. | 1 ~ 5 m/min. | |
| TOOL MAGAZINE | |||
| Tool magazine capacity | 32 T ( Opt. 40 / 60 / 90 / 120 ) | ||
| Max. tool length | 350 mm ( Opt. 400 ) | ||
| Max. tool weight | 20 kg | ||
| Max. tool diameter / adj. pocket empty | Ø 127 / Ø 215 mm | ||
| ACCURACY | |||
| Positioning accuracy ( JIS B 6338 ) | ± 0.015 mm / Full Travel | ||
| Positioning accuracy ( VDI 3441 ) | P ≤ 0.030 mm / Full Travel | P ≤ 0.040 mm / Full Travel | P ≤ 0.050 mm / Full Travel |
| Repeatability ( JIS B 6338 ) | ± 0.003 mm | ||
| Repeatability ( VDI 3441 ) | Ps ≤ 0.025 mm | Ps ≤ 0.030 mm | Ps ≤ 0.035 mm |
| GENERAL | |||
| Coolant tank capacity | 900 liter | ||
| Lubrication oil tank capacity | 6 liter | ||
| Hydraulic tank capacity | 100 liter | ||
| Pneumatic pressure requirement | 5 ~ 8 kg / cm² | ||
| Power requirment | AC 220 ± 10 % Vac | ||
| Machine weight | 41,000 kg | 45,000 kg | 49,000 kg |
Specifications are subject to change without notice.
Top