HTP Series Super Rigid Bridge Type Machining Center :
| Print this page | HTP-4041 | HTP-5041 | HTP-6041 | HTP-7041 |
|---|---|---|---|---|
| SPECIFICATIONS | ||||
| X-axis travel | 4,000 mm | 5,000 mm | 6,000 mm | 7,000 mm |
| Y-axis travel | Opt.4,100 mm ( 4,800 ) | |||
| Z-axis travel | 1,000 mm ( Opt. 1,200 / 1,400 ) | |||
| Dist. between columns | 4,300 mm | |||
| Dist. from spindle nose to table top | 200 ~ 1,200 mm ( Opt. 200 ~ 1,400 / 200 ~ 1,600 ) | |||
| TABLE | ||||
| Table size ( X x Y ) | 4,020 x 3,000 mm | 5,020 x 3,000 mm | 6,020 x 3,000 mm | 7,020 x 3,000 mm |
| Table load capacity | 15,000 kg | 18,000 kg | 20,000 kg | 20,000 kg |
| SPINDLE | ||||
| Spindle taper | BBT50 ( ISO 50 ) | |||
| Spindle motor ( Cont. / 30 min. ) | 22 / 26 kW ( Opt. 30 / 37 ) | |||
| Spindle speed | Gear Spindle 4,000 rpm | |||
| FEED RATE | ||||
| X-axis rapids feed rate | 15 m/min. | 10 m/min. | 7.5 m/min. | |
| Y / Z axes rapids feed rate | 10 m/min. | |||
| Cutting feed rate | 1 ~ 10 m/min. | 1 ~ 5 m/min. | ||
| TOOL MAGAZINE | ||||
| Tool magazine capacity | 32 T ( Opt. 40 / 60 / 90 / 120 ) | |||
| Max. tool length | 350 mm ( Opt. 400 ) | |||
| Max. tool weight | 20 kg | |||
| Max. tool diameter / adj. pocket empty | Ø 127 / Ø 215 mm | |||
| ACCURACY | ||||
| Positioning accuracy ( JIS B 6338 ) | ± 0.015 mm / Full Travel | |||
| Positioning accuracy ( VDI 3441 ) | P ≤ 0.030 mm / Full Travel |
P ≤ 0.040 mm / Full Travel |
P ≤ 0.050 mm / Full Travel |
P ≤ 0.040 mm / Full Travel |
| Repeatability ( JIS B 6338 ) | ± 0.003 mm | |||
| Repeatability ( VDI 3441 ) | Ps ≤ 0.025 mm | Ps ≤ 0.030 mm | Ps ≤ 0.035 mm | Ps ≤ 0.030 mm |
| GENERAL | ||||
| Coolant tank capacity | 1,300 liter | |||
| Lubrication oil tank capacity | 6 liter | |||
| Hydraulic tank capacity | 100 liter | |||
| Pneumatic pressure requirement | 5 ~ 8 kg / cm² | |||
| Power requirment | AC 220 ± 10 % Vac | |||
| Machine weight | 45,000 kg | 49,000 kg | 53,000 kg | 64,000 kg |
Specifications are subject to change without notice.
Top