| VP Series |
|---|
| CAPACITY | VP-2016 | VP-3016 | |
|---|---|---|---|
| X-axis travel | 2,000 mm | 3,000 mm | |
| Y-axis travel | 1,600 mm | ||
| Z-axis travel | 760 mm | ||
| Dist. from spindle nose to table top | 200 ~ 960 ( #50 gear spindle ) | ||
| Distance between columns | 1,800 mm | ||
| WORKING TABLE | |||
| Table size ( X direction ) | 2,000 mm | 3,000 mm | |
| Table size ( Y direction ) | 1,500 mm | ||
| Table load capacity | 5,000 kg | 7,000 kg | |
| SPINDLE | |||
| Spindle power ( cont. / 30 min. ) | 22 / 26 kW | ||
| Spindle speed | Gear Spindle 6,000 rpm | ||
| Spindle taper | BT50 / BBT50 ( Opt. ) | ||
| FEED RATE | |||
| X-axis rapid feed rate | 24 m/min. | 20 m/min. | |
| Y-axis rapid feed rate | 24 m/min. | ||
| Z-axis rapid feed rate | 20 m/min. | ||
| Cutting feed rate | 12 m/min. | ||
| TOOL MAGAZINE | |||
| Tool magazine capacity | 32 T ( Opt. 24 / 40 T ) | ||
| Max. tool diameter / adj. pocket empty | Ø 125 / Ø 229 mm | ||
| Max. tool length ( from gauge line ) | 350 mm | ||
| Max. tool weight | 15 kg | ||
| ACCURACY | |||
| Positioning accuracy ( ISO230-2 ) |
X-axis mm | A ≤ 0.012 | A ≤ 0.016 |
| Y / Z axes mm | A ≤ 0.012 | ||
| Repeatability ( ISO230-2 ) |
X-axis mm | R ≤ 0.008 | R ≤ 0.012 |
| Y / Z axes mm | R ≤ 0.010 | ||
| GENERAL | |||
| Coolant tank capacity ( pump ) | 465 liter ( 1.5 HP ) | ||
| Lubrication oil tank capacity | 4.6 liter | ||
| Hydraulic unit tank capacity ( pump ) | 120 liter ( 7.5 HP ) | ||
| Pneumatic pressure requirement ( min. ) | 5 ~ 7 kg/cm² | ||
| Power requirement | AC 220 ± 10 % 3 phase , 60 / 50 Hz / 40 kVA | ||
| Machine weight | 20,000 kg | 24,000 kg | |
Specifications are subject to change without notice.
Top