| AF-Ⅱ Series |
|---|
| Models | AF-1400MAX | AF-1600MAX | AF-1800MAX |
|---|---|---|---|
| X-axis travel | 1,400 mm | 1,600 mm | 1,800 mm |
| Y-axis travel | 800 mm | ||
| Z-axis travel | 800 mm | ||
| Distance from spindle center to column |
903 mm | ||
| Distance from spindle nose to table top |
160 ~ 960 mm*2 | ||
| TABLE | |||
| Table size ( X direction ) | 1,500 mm | 1,700 mm | 1,900 mm |
| Table size ( Y direction ) | 800 mm | ||
| Table load capacity | 1,200 kg | 1,500 kg | 1,800 kg |
| T slot ( Width x Pitch x No. ) | 18 mm x 150 mm x 5 | ||
| SPINDLE | |||
| Spindle taper | BT40 ( BT50 Opt. ) | ||
| Spindle motor ( cont. / 30 min. ) | 11 / 15 kW | ||
| Spindle speed | Direct-drive 12,000 rpm | ||
| FEED RATE | |||
| X / Y axes rapid feed rate | 30 m/min. | ||
| Z-axis rapid feed rate | 24 m/min. | ||
| Cutting feed rate | 12 m/min. | ||
| TOOL MAGAZINE | |||
| Tool magazine capacity | 24 T | ||
| Max. tool length | 250 mm*1 | ||
| Max. tool weight | 7 kg*1 | ||
| Max. tool diameter / adj. pocket empty |
Ø 75 / Ø 150 mm*1 | ||
| ACCURACY | |||
| Positioning accuracy ( ISO230-2 ) | 0.008 mm | ||
| Repeatability ( ISO230-2 ) | 0.006 mm | ||
| GENERAL | |||
| Control system | FANUC Oi - MF PLUS | ||
| Pneumatic pressure requirement | 6 kg / cm² | ||
| Power requirement | 40 kVA | ||
| Coolant tank capacity | 610 liter | 630 liter | 660 liter |
| Machine weight | 14,000 kg | 16,000 kg | 18,000 kg |
Specifications are subject to change without notice.
*1 Tool specifications may vary depending on the size of tool magazine. For details, please
contact Awea sales representative.
*2 BT50 : 200 ~1,000 mm
Top