| AF-Ⅱ Series |
|---|
| Models | AF-1060Ⅱ | AF-1250Ⅱ | AF-1400Ⅱ | AF-1600Ⅱ |
|---|---|---|---|---|
| X-axis travel | 1,060 mm | 1,250 mm | 1,400 mm | 1,600 mm |
| Y-axis travel | 650 mm | 740 mm | ||
| Z-axis travel | 610 mm | |||
| Distance from spindle center to column |
710 mm | 780 mm | ||
| Distance from spindle nose to table top |
125 ~ 735 mm | |||
| TABLE | ||||
| Table size ( X direction ) | 1,200 mm | 1,350 mm | 1,500 mm | 1,700 mm |
| Table size ( Y direction ) | 650 mm | 740 mm | ||
| Table load capacity | 700 kg | 1,000 kg | 1,450 kg | |
| T slot ( Width x Pitch x No. ) | 18 mm x 100 mm x 5 | 18 mm x 100 mm x 7 | ||
| SPINDLE | ||||
| Spindle taper | BT40 ( BT50 Opt. ) | BT40 | ||
| Spindle motor ( cont. / 30 min. ) | 11 /15 kW | |||
| Spindle speed | Direct-drive 12,000 rpm | |||
| FEED RATE | ||||
| X / Y axes rapid feed rate | 48 m/min. | 36 m/min. | ||
| Z-axis rapid feed rate | 36 m/min. | 24 m/min. | ||
| Cutting feed rate | 15 m/min. | |||
| TOOL MAGAZINE | ||||
| Tool magazine capacity | 30 T | |||
| Max. tool length | 250 mm | |||
| Max. tool weight | 7 kg | 8 kg | ||
| Max. tool diameter / adj. pocket empty |
Ø 75 / Ø 150 | |||
| ACCURACY | ||||
| Positioning accuracy ( ISO230-2 ) | 0.008 mm | |||
| Repeatability ( ISO230-2 ) | 0.006 mm | |||
| GENERAL | ||||
| Control system | FANUC Oi-MF PLUS | |||
| Pneumatic pressure requirement | 6 kg / cm² | |||
| Power requirement | 30 kVA | 35 kVA | ||
| Coolant tank capacity | 370 liter | 380 liter | 390 liter | 486 liter |
| Machine weight | 7,200 kg | 7,800 kg | 8,200 kg | 8,600 kg |
Specifications are subject to change without notice.
Top