LG-50 Series Gantry Type Machining Center :
| Print this page | LG-6050 | LG-8050 | LG-10050 | LG-14050 |
|---|---|---|---|---|
| CAPACITY | ||||
| X-axis travel | 6,000 mm | 8,000 mm | 10,000 mm | 14,000 mm |
| Y-axis travel | 5,000 mm | |||
| Z-axis travel | 1,000 mm | |||
| Dist. form spindle nose to table top | 200 ~ 1,200 mm | |||
| Dist. between columns ( with water eliminator ) |
5,800 mm | |||
| WORKING TABLE | ||||
| Table size ( X direction ) | 6,000 mm | 8,000 mm | 10,000 mm | 14,000 mm |
| Table size ( Y direction ) | 4,800 mm | |||
| Table load capacity | 2,500 kg/m² | |||
| SPINDLE | ||||
| Spindle motor ( cont. / 30 min. ) |
22 / 26 kW ( 30 / 35 HP ) | |||
| Spindle speed | Gear 4,000 rpm ( Std. ) ; Gear 5,000 / 6,000 rpm ( Opt. ) ; Built-in 6,000 / 8,000 rpm ( Opt. ) |
|||
| Spindle taper | CAT50 ( 7 / 24 ) | |||
| FEED RATE | ||||
| X-axis rapid feedrate | 20 m/min. | |||
| Y-axis rapid feedrate | 12 m/min. | |||
| Z-axis rapid feedrate | 10 m/min. | |||
| Cutting feedrate | 10 m/min. | |||
| TOOL MAGAZINE | ||||
| Tool magazine capacity | 32 ( 60 Opt. ) | |||
| Max. tool diameter / adj. pocket empty |
Ø 127 / 215 mm | |||
| Max. tool length ( from gauge line ) |
350 mm | |||
| Max. tool weight | 20 kg | |||
| ACCURACY | ||||
| Positioning accuracy ( JIS B 6338 ) |
± 0.025 mm / Full Travel | |||
| Positioning accuracy ( VDI 3441 ) / Full Travel |
P = 0.035 mm | P = 0.040 mm | P = 0.050 mm | P = 0.060 mm |
| Positioning accuracy ( VDI 3441 ) Y / Z axes |
P = 0.040 mm / Full Travel | |||
| Repeatability ( JIS B 6338 ) |
± 0.003 mm | |||
| Repeatability ( VDI 3441 ) |
Ps = 0.026 mm | Ps = 0.030 mm | Ps = 0.038 mm | Ps = 0.045 mm |
| Repeatability ( VDI 3441 ) Y / Z axes |
Ps = 0.030 mm | |||
| GENERAL | ||||
| Power requirement | 220 ± 10 % | |||
| Pneumatic pressure requirement | 5 ~ 8 kg/cm² | |||
| Hydraulic unit tank capacity | 120 liter | |||
| Lubrication oil tank capacity | 6 liter | |||
| Coolant tank capacity | 1,600 liter | |||
Specifications are subject to change without notice.
Top