AWEA

AHM series

Specifications	AHM-800 / L	AHM-1000 / L	AHM-800APC	AHM-1000APC
X-axis travel	1,700 / 2,100 mm	1,700 / 2,100 mm	1,700 mm
Y-axis travel	1,350 mm	1,350 mm	1,150 mm
Z-axis travel	1,200 mm		1,200 mm
Dist. from spindle center to table top	0 ~ 1,350 mm		0 ~ 1,150 mm
Dist. from spindle nose to table center	200 ~ 1,400 mm		200 ~ 1,400 mm
TABLE
Table size ( X x Y )	800 x 800 mm	1,000 x 1,000 mm	800 x 800 mm	1,000 x 1,000 mm
Table indexing ( B-axis )	1°		1°
Max. work-piece diameter / height	Ø 1,700 / 1,350 mm		Ø 1,600 / 1,150 mm
Table load capacity	4,000 kg		4,000 kg
SPINDLE
Spindle taper	BBT50
Spindle motor ( cont. / 30 min. )	22 / 26 kW
Spindle speed	Gear 6,000 rpm
FEED RATE
X / Y / Z axes rapid feed rate	20 / 20 / 20 m/min.
Cutting feed rate	6 m/min.
TOOL MAGAZINE
Tool magazine capacity	40 / 60 T ( Opt. )
Max. tool length	400 mm
Max. tool weight	25 kg
Max. tool dia. / adj. pocket empty	Ø 125 / Ø 250 mm
ACCURACY
Positioning accuracy ( ISO230-2 )	0.008 mm
Repeatability ( ISO230-2 )	0.003 mm
GENERAL
Control system	FANUC Oi-MF
Pneumatic pressure requirement	6 kg / cm²
Power requirement	220 ± 10 % Vac / 50 kVA
Machine dimension ( W x D x H )	4,100 x 4,700 x 4,000 mm
Machine weight	21,000 / 21,500 kg	21,200 / 22,000 kg	24,300 kg	24,500 kg

Specications are subject to change without notice.