LG-70 Series Gantry Type 5-Face Machining Center :
| Print this page | LG-10070 | LG-20070 |
|---|---|---|
| CAPACITY | ||
| X-axis travel | 10,000 mm | 20,000 mm |
| Y-axis travel | 7,000 mm | |
| Z-axis travel | 1,000 mm | |
| Dist. form spindle nose to table top | 200 ~ 1,200 mm | |
| Dist. between columns ( with water eliminator ) |
7,800 mm ( 7,500 mm ) | |
| WORKING TABLE | ||
| Table size ( X direction ) | 10,000 mm | 20,000 mm |
| Table size ( Y direction ) | 6,800 mm | |
| Table load capacity | 2,500 kg/m² | |
| SPINDLE | ||
| Spindle motor ( cont. / 30 min. ) |
22 / 26 kW ( 30 / 35 HP ) | |
| Spindle speed | Gear 4,000 rpm ( Std. ) ;
Gear 5,000 / 6,000 rpm ( Opt. ) ; Built-in 6,000 / 8,000 rpm ( Opt. ) |
|
| Spindle taper | CAT50 ( 7 / 24 ) | |
| FEED RATE | ||
| X-axis rapid feed rate | 20 m/min. | |
| Y-axis rapid feed rate | 10 m/min. | |
| Z-axis rapid feed rate | 10 m/min. | |
| Cutting feed rate | 1 ~ 10 m/min. | |
| TOOL MAGAZINE | ||
| Tool magazine capacity | 32 ( 60 Opt. ) | |
| Max. tool diameter / adj. pocket empty |
Ø 127 / 215 mm | |
| Max. tool length ( from gauge line ) |
350 mm | |
| Max. tool weight | 20 kg | |
| ACCURACY | ||
| Positioning accuracy ( JIS B 6338 ) |
± 0.025 / Full Travel | |
| Positioning accuracy ( VDI 3441 ) / Full Travel |
P = 0.050 mm | P = 0.10 mm |
| Positioning accuracy ( VDI 3441 ) Y / Z axes |
P = 0.040 mm / Full Travel ( Optical linear scale ) |
|
| Repeatability ( JIS B 6338 ) |
± 0.003 mm | |
| Repeatability ( VDI 3441 ) |
Ps = 0.038 mm | Ps = 0.080 mm |
| Repeatability ( VDI 3441 ) Y / Z axes |
Ps = 0.030 mm ( Optical linear scale ) |
|
| GENERAL | ||
| Power requirement | 80 kVA 220 ±10 % Vac 3 phase 50/60 Hz | |
| Pneumatic pressure requirement | 5 ~ 8 kg/cm² | |
| Hydraulic unit tank capacity | 120 liter | |
| Lubrication oil tank capacity | 6 liter | |
| Coolant tank capacity | 2,100 liter | |
Specifications are subject to change without notice.
Top