HVM-6032 5-Face Bridge Type Machining Center:
| Print This Page | HVM-4032 | HVM-5032 | HVM-6032 | HVM-6033Y |
|---|---|---|---|---|
| WORKING CAPACITY | ||||
| X-axis travel | 4,000 mm ( 157.5" ) | 5,000 mm ( 196.8" ) | 6,000 mm ( 236.2" ) | 6,000 mm ( 236.2" ) |
| Y-axis travel | 3,900 mm ( 153.5" ) | 3,900 mm ( 153.5" ) | 3,900 mm ( 153.5" ) | 4,500 mm ( 177.2" ) |
| Z-axis travel | 1,000 mm ( 39.3" ) | 1,000 mm ( 39.3" ) | 1,000 mm ( 39.3" ) | 1,000 mm ( 39.3" ) |
| Table size | 4,020 x 2,400 mm ( 158.3" x 94.5" ) |
5,020 x 2,400 mm ( 197.6" x 94.5" ) |
6,020 x 2,400 mm ( 237.0" x 94.5" ) |
6,020 x 2,400 mm ( 237.0" x 94.5" ) |
| Table load capacity | 12,000 kg ( 26,400 lb ) | 18,000 kg ( 39,600 lb ) | 20,000 kg ( 44,000 lb ) | 20,000 kg ( 44,000 lb ) |
| Dist. between columns | 3,200 mm ( 126.0" ) | 3,200 mm ( 126.0" ) | 3,200 mm ( 126.0" ) | 3,300 mm ( 129.9" ) |
| SPINDLE | ||||
| Spindle motor ( cont. / 30 min. ) |
22 / 26 kW ( 30 / 35 HP ) |
22 / 26 kW ( 30 / 35 HP ) |
22 / 26 kW ( 30 / 35 HP ) |
22 / 26 kW ( 30 / 35 HP ) |
| Spindle speed | 10 ~ 4,000 rpm ( in vertical direction ), 20 ~ 24,00 rpm ( in horizontal direction ) |
10 ~ 4,000 rpm ( in vertical direction ), 20 ~ 24,00 rpm ( in horizontal direction ) |
10 ~ 4,000 rpm ( in vertical direction ), 20 ~ 24,00 rpm ( in horizontal direction ) |
10 ~ 4,000 rpm ( in vertical direction ), 20 ~ 24,00 rpm ( in horizontal direction ) |
| Spindle nose configuration | BT 50 ( 7 / 24 ) | BT 50 ( 7 / 24 ) | BT 50 ( 7 / 24 ) | BT 50 ( 7 / 24 ) |
| Dist. from spindle nose to table top |
200 ~ 1,200 mm ( 7.9" ~ 47.2" ) ( Standard ) 400 ~ 1,400 mm ( 15.7" ~ 55.1" ) ( Option ) |
200 ~ 1,200 mm ( 7.9" ~ 47.2" ) ( Standard ) 400 ~ 1,400 mm ( 15.7" ~ 55.1" ) ( Option ) |
200 ~ 1,200 mm ( 7.9" ~ 47.2" ) ( Standard ) 400 ~ 1,400 mm ( 15.7" ~ 55.1" ) ( Option ) |
200 ~ 1,200 mm ( 7.9" ~ 47.2" ) ( Standard ) 400 ~ 1,400 mm ( 15.7" ~ 55.1" ) ( Option ) |
| FEED RATE | ||||
| X-axis rapids | 15,000 mm/min. ( 590.6 IPM ) |
10,000 mm/min. | 10,000 mm/min. | 10,000 mm/min. |
| Y / Z axes rapids | 12,000 / 10,000 mm/min. |
12,000 / 10,000 mm/min. |
12,000 / 10,000 mm/min. |
10,000 / 10,000 mm/min. ( 393.7 / 393.7 IPM ) |
| Cutting feedrate | 1 ~ 10,000 mm/min. ( 0.04 ~ 393.7 IPM ) |
1 ~ 8,000 mm/min. ( 0.04 ~ 315.0 IPM ) |
1 ~ 5,000 mm/min. ( 0.04 ~ 196.9 IPM ) |
1 ~ 5,000 mm/min. ( 0.04 ~ 196.9 IPM ) |
| ACCURACY | ||||
| Repeatability ( JIS6338 ) |
± 0.003 mm ( ± 0.0001" ) |
± 0.003 mm ( ± 0.0001" ) |
± 0.003 mm ( ± 0.0001" ) |
± 0.003 mm ( ± 0.0001" ) |
| Positioning accuracy ( JIS6338 ) |
± 0.015 mm ( ± 0.0006" ) full travel |
± 0.015 mm ( ± 0.0006" ) full travel |
± 0.015 mm ( ± 0.0006" ) full travel |
± 0.015 mm ( ± 0.0006" ) full travel |
| TOOL MAGAZINE | ||||
| Tool magazine capacity | 60 tools ( 90, 120 Option ) |
60 tools ( 90, 120 Option ) |
60 tools ( 90, 120 Option ) |
60 tools ( 90, 120 Option ) |
| Max. tool diameter / adj. pocket empty |
127 / 240 mm ( 5.0" / 9.4" ) |
127 / 240 mm ( 5.0" / 9.4" ) |
127 / 240 mm ( 5.0" / 9.4" ) |
127 / 240 mm ( 5.0" / 9.4" ) |
| Max. tool length | 400 mm ( 15.7" ) | 400 mm ( 15.7" ) | 400 mm ( 15.7" ) | 400 mm ( 15.7" ) |
| Max. tool weight | 25 kg ( 55 lb ) | 25 kg ( 55 lb ) | 25 kg ( 55 lb ) | 25 kg ( 55 lb ) |
| Tool changing time ( tool to tool ) |
80 sec. | 80 sec. | 80 sec. | 80 sec. |
| Dimension ( Approx. ) | ||||
| Length | 10,480 mm ( 413" ) | 12,775 mm ( 503" ) | 14,875 mm ( 585" ) | 14,875 mm ( 585" ) |
| Width | 7,475 mm ( 294" ) | 6,775 mm ( 267" ) | 6,775 mm ( 267" ) | 8,150 mm ( 321" ) |
| Height | 5,600 mm ( 220" ) | 5,600 mm ( 220" ) | 5,600 mm ( 220" ) | 5,600 mm ( 220" ) |
| Weight | 54,000 kg ( 118,800 lb ) |
55,000 kg ( 121,000 lb ) |
57,000 kg ( 125,400 lb ) |
59,000 kg ( 129,800 lb ) |
| Print This Page | HVM-4032 | HVM-5032 | HVM-6032 | HVM-6033Y |
Specifications are subject to change without notice.
*1. The distance may be varied among different options. Please double check with your sales contact on the actual value.
Top