HVM-3018 5-Face Bridge Type Machining Center:
| Print This Page | HVM-3018 | HVM-4018 | HVM-4025 | |
|---|---|---|---|---|
| WORKING CAPACITY | ||||
| X-axis travel | 3,060 mm ( 120.5" ) | 4,000 mm ( 157.5" ) | 4,000 mm ( 157.5" ) | |
| Y-axis travel | 2,500 mm ( 98.4" ) | 2,500 mm ( 98.4" ) | 3,200 mm ( 126.0" ) | |
| Z-axis travel | 1,000 mm ( 39.3" ) | 1,000 mm ( 39.3" ) | 1,000 mm ( 39.3" ) | |
| Table size | 3,260 x 1,500 mm ( 128.3" x 59.0" ) |
4,020 x 1,500 mm ( 158.3" x 59.0" ) |
4,020 x 2,010 mm ( 158.3" x 79.1" ) |
|
| Table load capacity | 10,000 kg ( 22,000 lb ) | 12,000 kg ( 26,400 lb ) | 12,000 kg ( 26,400 lb ) | |
| Dist. between columns | 1,800 mm ( 70.9" ) | 1,800 mm ( 70.9" ) | 2,500 mm ( 98.4" ) | |
| SPINDLE | ||||
| Spindle motor ( cont. / 30 min. ) |
22 / 26 kW ( 30 / 35 HP ) | 22 / 26 kW ( 30 / 35 HP ) | 22 / 26 kW ( 30 / 35 HP ) | |
| Spindle speed | 10 ~ 4,000 rpm ( in vertical direction ), 20 ~ 24,00 rpm ( in horizontal direction ) |
10 ~ 4,000 rpm ( in vertical direction ), 20 ~ 24,00 rpm ( in horizontal direction ) |
10 ~ 4,000 rpm ( in vertical direction ), 20 ~ 24,00 rpm ( in horizontal direction ) |
|
| Spindle nose configuration | BT 50 ( 7 / 24 ) | BT 50 ( 7 / 24 ) | BT 50 ( 7 / 24 ) | |
| Dist. from spindle nose to table top |
200 ~ 1,200 mm ( 7.9" ~ 47.2" ) ( Standard ) 400 ~ 1,400 mm ( 15.7" ~ 55.1" ) ( Option ) |
200 ~ 1,200 mm ( 7.9" ~ 47.2" ) ( Standard ) 400 ~ 1,400 mm ( 15.7" ~ 55.1" ) ( Option ) |
200 ~ 1,200 mm ( 7.9" ~ 47.2" ) ( Standard ) 400 ~ 1,400 mm ( 15.7" ~ 55.1" ) ( Option ) |
|
| FEED RATE | ||||
| X-axis rapids | 20,000 mm/min. ( 787.4 IPM ) |
15,000 mm/min. ( 590.6 IPM ) |
15,000 mm/min. ( 590.6 IPM ) |
|
| Y / Z axes rapids | 15,000 / 10,000 mm/min. ( 590.6 / 393.7 IPM ) |
15,000 / 10,000 mm/min. ( 590.6 / 393.7 IPM ) |
15,000 / 10,000 mm/min. ( 590.6 / 393.7 IPM ) |
|
| Cutting feedrate | 1 ~ 10,000 mm/min. ( 0.04 ~ 393.7 IPM ) |
1 ~ 10,000 mm/min. ( 0.04 ~ 393.7 IPM ) |
1 ~ 10,000 mm/min. ( 0.04 ~ 393.7 IPM ) |
|
| ACCURACY | ||||
| Repeatability ( JIS6338 ) |
± 0.003 mm ( ± 0.0001" ) |
± 0.003 mm ( ± 0.0001" ) |
± 0.003 mm ( ± 0.0001" ) |
|
| Positioning accuracy ( JIS6338 ) |
± 0.015 mm ( ± 0.0006" ) full travel |
± 0.015 mm ( ± 0.0006" ) full travel |
± 0.015 mm ( ± 0.0006" ) full travel |
|
| TOOL MAGAZINE | ||||
| Tool magazine capacity | 60 tools ( 90, 120 Option ) |
60 tools ( 90, 120 Option ) |
60 tools ( 90, 120 Option ) |
|
| Max. tool diameter / adj. pocket empty |
127 / 240 mm ( 5.0" / 9.4" ) |
127 / 240 mm ( 5.0" / 9.4" ) |
127 / 240 mm ( 5.0" / 9.4" ) |
|
| Max. tool length | 400 mm ( 15.7" ) | 400 mm ( 15.7" ) | 400 mm ( 15.7" ) | |
| Max. tool weight | 25 kg ( 55 lb ) | 25 kg ( 55 lb ) | 25 kg ( 55 lb ) | |
| Tool changing time ( tool to tool ) |
80 sec. | 80 sec. | 80 sec. | |
| Dimension ( Approx. ) | ||||
| Length | 9,030 mm ( 356" ) | 11,000 mm ( 433" ) | 10,480 mm ( 413" ) | |
| Width | 6,100 mm ( 240" ) | 6,100 mm ( 240" ) | 6,775 mm ( 267" ) | |
| Height | 5,600 mm ( 220" ) | 5,600 mm ( 220" ) | 5,600 mm ( 220" ) | |
| Weight | 39,000 kg ( 85,800 lb ) | 49,000 kg ( 107,800 lb ) | 53,000 kg ( 116,600 lb ) | |
| Print This Page | HVM-3018 | HVM-4018 | HVM-4025 | |
Specifications are subject to change without notice.
*1. The distance may be varied among different options. Please double check with your sales contact on the actual value.
Top