FCV-800 series Gantry Type 5-Axis Machining Center :
| MODELS | FC-900 High speed series | FCV-800 5-axis series |
|---|---|---|
| X-axis travel ( right-left ) | 900 mm | 800 mm |
| Y-axis travel ( back-forth ) | 900 mm | |
| Z-axis travel ( up-down ) | 660 mm | |
| Distance from spindle nose to table top | 150 ~ 810 mm | 90 ~ 750 mm |
| WORKING TABLE | ||
| Table size | 1,060 x 900 mm ( X x Y ) | Ø 850 mm |
| T-slot size | 14 x 9 x 100 mm | 14 × 8 × 45˚ mm |
| Table load capacity | 2,500 kg | 0° : 1,000 kg / 90° : 700 kg |
| SPINDLE | ||
| Spindle speed | Built-in spindle 16,000 rpm | |
| Spindle taper | BBT40 | |
| Spindle motor output ( cont. / 30 min ) | 26 kW | |
| AXES | ||
| Swiveling range of A-axis | --- | -120˚ ~ +30˚ |
| Rotary range of C-axis | --- | 360˚ |
| Swiveling speed of A-axis | --- | 30 rpm |
| Rotary speed of C-axis | --- | 100 rpm |
| Cutting feed rate | 24 m/min | |
| Rapid feed rate ( X / Y / Z ) | 48 m/min | |
| TOOL MAGAZINE | ||
| ATC type | Arm type | |
| Tool magazine capacity | 40 T | |
| Max. tool diameter / adj. pocket empty | Ø 90 / 125 mm | |
| Max. tool length | 300 mm | |
| Max. tool weight | 8 kg | |
| GENERAL | ||
| CNC control | FANUC 31i | HEIDENHAIN iTNC 530 |
| Coolant tank capacity | 500 L | |
| Air requirement | 6 kg / cm2 | |
| Power requirement | 65 kVA | 90 kVA |
| Machine weight | 13,000 kg | 15,000 kg |
| Dimensions ( L × W × H ) | 5,430 × 2,730 × 3,350 mm | |
Specifications are subject to change without notice.
Top