FCV-620 series Ultra Performance 5-Axis Machining Center :
| CAPACITY | FCV-620 | |
|---|---|---|
| X-axis travel | mm | 635 |
| Y-axis travel | mm | 535 |
| Z-axis travel | mm | 460 |
| B-axis rotary range | degree | -50˚ ~ +110˚ |
| C-axis rotary range | degree | 360˚ |
| B / C axes swiveling speed | rpm | 25 |
| Distance from spindle nose to table center | mm | 150 ~ 610 |
| ROTARY TABLE | ||
| Table diameter | mm | Ø 650 |
| Table load capacity ( 0° ~ 45° ) | kg | 300 |
| Table load capacity ( 45° ~ 90° ) | kg | 200 |
| T-slot ( width x no. x space ) | mm | 18 X 5 X 100 |
| SPINDLE | ||
| Spindle taper | BBT40 / HSK-A63 | |
| Spindle speed | rpm | Direct drive 12,000 ( 15,000 ) / Built-in 16,000 ( 20,000 ) |
| Spindle motor ( cont. / min ) | kW | 11 / 15 ( FANUC 12,000 rpm ) |
| FEED RATE | ||
| X / Y / Z axes rapid feed rate | m/min. | 36 |
| Cutting feed rate | m/min. | 1-20 |
| TOOL MAGAZINE | ||
| Tool magazine capacity | T | 32 ( 40 / 60 ) |
| Max. tool diameter / adj. pocket empty | mm | Ø 75 / Ø 127 |
| Max. tool length | mm | 250 |
| Max. tool weight | kg | 6 |
| ACCURACY | ||
| Positioning accuracy ( VDI 3441 ) | mm | P ≤ 0.012 / Full Travel |
| Repeatability ( VDI 3441 ) | mm | Ps ≤ 0.008 |
| GENERAL | ||
| Control system | HEIDENHAIN iTNC 640 / FANUC Oi -MF*1 | |
| Pneumatic pressure requirement ( min ) | kg/cm² | 6 |
| Power requirement | kVA | 50 |
| Machine weight | kg | 8,500 |
*1 For 4+1 axes
Specifications are subject to change without notice.
Top